Hall Effect Current Sensor 400A/2000A/3000A/5000A/8000A to 20000A

Hall effect current sensors are AC/DC universal current sensors, with non-invasive structure, 5us fast response time, 1.0%FS accuracy, 0-5V output signal, ±15V power supply, measuring range can be 0-400A ~ 0-20000A or even higher current. Open loop current sensors are widely used for AC and DC high current detection, such as the high frequency switching power supply and solar power supply management system.

SKU: CCHN-CUS-ACDC20000

30-day Returns

Free Shipping

Delivery date: 6-25 days

Overview

Hall effect current sensor has measuring range of AC/DC 400A/500A/1000A/2000A/3000A/8000A/10000A to 20000A.

Specification:

Model	CCHN-AHKC-K	CCHN-AHKC-H	CCHN-AHKC-KA	CCHN-AHKC-HB
Shipping weight	1kg
Hole size *	64*16mm	82*32mm	104*36mm	132*52mm
Measuring range of input current *	AC/DC 0-400A ~ 0-2000A	AC/DC 0-500A ~ 0-3000A	AC/DC 0-500A ~ 0-5000A	AC/DC 0-2000A ~ 0-20000A
Output signal *	0-5VDC, 0-±5VDC (for bidirectional current measurement)
Zero offset voltage	±20mV
Offset voltage drift	≤±1.0mV/℃
Linearity	≤0.2%FS
Power supply	±15VDC
Accuracy	1.0%F.S.
Bandwidth	0~20kHz
Response time	≤5us
Withstand voltage	AC 2500V (between input, output and power supply)
Work temperature	-40~+85℃
Storage temperature	-40~+85℃
Humidity	≤95%RH (no dew formation, no corrosive gas)
Elevation	≤3500m
Measuring method	Split-core type
Installation	Screw fixation

400A to 20000A AC/DC current sensor dimensional diagram:
Hall effect current sensor 400A/500A/2000A/5000A to 20000A dimension

Model	Dimension (mm)
Model	W	H	D	a	e	N (Mounting)
CCHN-AHKC-K	127	63	25	64	16	30
CCHN-AHKC-H	149	79	25	82	32	46
CCHN-AHKC-KA	176	95.5	29	104	36	60
CCHN-AHKC-HB	204	111.5	29	132	52	48*2

400A to 20000A AC/DC hall effect current sensor wiring diagram:
Hall effect current sensor 400A/500A/2000A/5000A to 20000A wiring diagram

Details

Tips: The newest Hall Effect current sensor for AC/DC 400A to 20000A
The stability and accuracy of the output current is critical in high-power and high-frequency switching power supply. Now the detection of output current mainly uses the shunt and Hall Effect current sensor. In the case of high current, the volume of the shunt should be very large to guarantee stability, and there is a problem that it cannot be isolated. In the case of the high-power and high-frequency switching power supply volume become smaller and smaller, the manufacturers generally use Hall Effect current sensor to ensure making smaller volume to achieve physical isolation, safe and reliable. In the high frequency situation, the iron core will heat in the conventional Hall current sensor. This will result in the current sensor output deviation from the actual value or even no signal output and lead to return circuit abnormal in high-frequency switching power supply feedback, thus affecting the high-frequency switching power supply instability or even damage.The new Hall Effect current sensor applies Nano-crystalline as the magnetic core material, the permeability, excitation current and iron loss of the core are superior to the silicon steel core, and the strip thickness is only about 0.03mm. Its resistivity, hardness, tensile strength is also higher than the silicon steel core, which can effectively solve the heating phenomenon for current sensor in the high frequency current. And it greatly improves the hall current sensor reliability and service life. CCHN-AHKC-KA is an open loop current sensor. The inner hole is 104*36mm, and the measurement current is up to AC/DC 5000A. In the case of ensuring the same current, the size is smaller, with split-core structure, easy to install. The redesigned circuit structure has optimized high-frequency circuit’s response time and long-term stability.