200ml Hydrothermal Synthesis Reactor, Stainless Steel

The kettle body and kettle cover of synthesis reactors are sealed by durable and reliable line seal structure with long-term stability to leak free seal.

Features:

• Thickening processing PTFE cover, not easy to soften.
• Beautiful appearance, reasonable structure and easy to operate.
• With PTFE liner, double care, acid and alkali, resistant to high temperature of 200 ℃.

Specification:

• Model: CCHN-KH-200
• Capacity: 200ml
• Material: 304 stanless steel, PTFE chamber
• Maximun Pressure: 3 MPa
• Safe Working Temperatue: 200 ℃
• Heating and Cooling Rate: ≤5 ℃/min
• Net Weight: 5kg
• Dimension: 110*200 mm (φ*H)

Structure:

Application:

Tips: How to Clean Hydrothermal Synthesis Reactor?

• Rinse with distilled water. After each use, rinse the hydrothermal synthesis reactor with distilled water to remove any residual chemicals or samples. Use a sufficient amount of distilled water to thoroughly rinse the inner walls and the bottom of the reactor.
• Soak in detergent solution. Prepare a detergent solution by dissolving a mild detergent in distilled water. Place the hydrothermal synthesis reactor in the detergent solution and let it soak for at least 30 minutes to loosen any stubborn residue.
• Scrub with a soft brush. After soaking, use a soft brush, such as a nylon brush or a sponge, to scrub the inner walls and the bottom of the hydrothermal synthesis reactor.  Be gentle to avoid scratching the reactor's surface.